Weber E-320 Guia Del Propietario página 13

PROBLEM
Side Burner does not light.
Flame is low in "HI" position
Push button ignition does not work.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web
site. Log onto www.weber.com ® .
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in
the "OFF" position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
Side Burner Grate
Side Burner Grate
Side Burner Cap
Side Burner cap
e Burner Ring & Head
Side Burner Ring & Head
Igniter Electrode
Igniter Electrode
WARNING: The side burner orifice (4)
must be parallel to the side burner tube
opening (5).
WWW.WEBER.COM
®
SIDEBURNER TROUBLESHOOTING
Is gas supply off?
Is the fuel hose bent or kinked?
Does burner light with a match?
Control Knob
Control Knob
Igniter Button
Igniter
CHECK
(4)
(5)
CURE
Turn supply on.
Straighten hose.
If match lights burner, check igniter (see below).
(3)
(2)
(1)
(2)
(1)
13
13