USING THE INDOOR KEYPAD
See Figure 73.
WARNING:
Keep moving door in sight when using indoor keypad.
Contact with moving door can cause DEATH or serious
injury.
Install the indoor keypad according to the instructions
included in the keypad operator's manual.
To raise or lower the garage door, press and release the
UP/DOWN button.
To enter and exit vacation mode, press and release the
LOCK ( ) button. When the unit is in vacation mode, it
can only be controlled using the indoor keypad. The unit
will not respond to the car remotes, outdoor keypad, or
smartphone app.
Up/Down
Button
Light
Button
Lock
Button
OPERATION
To turn the LED lights on and off, press and release the
Activating and Deactivating Accessory Ports:
To activate a accessory port, press the number on the
To deactivate a accessory port, press the number on the
Accessory
Port #7
Accessory
Port #3
Accessory
Port #4
44 - English
NOTE: Wireless keypads come with a receiver. When a
wireless keypad is locked, the LED on the receiver will
blink continuously.
LIGHT (
) button.
NOTE: When the LIGHT (
light will illuminate for three minutes.
indoor keypad corresponding with the desired port. For
example, to activate accessory port #2 press NUMBER 2
on your keypad.
NOTE: An active accessory port can be used to power
DC accessories. Multiple ports can be activated at once.
indoor keypad corresponding with the port.
Accessory
Receptacle
Port #1
AC
Accessory
Receptacle
Port #5
) button is pressed, the LED
Accessory
AC
Port #2
Accessory
Port #6
Fig. 73