Ariston ARWF 149 Instrucciones De Uso página 10

Personalisation
Setting the temperature
NA
By pressing the TEMPERATURE button to set the wash temperature. (See Table of wash cycles) Wash temperature can be
set selecting , "Cold", "Warm", "Hot" or 2 in-between positions which correspond to intermediate levels of water tempe-
rature (example: the position between "cold" and "warm" is lukewarm). See below for the indication in °C and °F for each
temperature position.
The available selections are:
•
• Cold
•
• Warm
•
• Hot
Setting the spin speed
By pressing the SPIN SPEED button to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1400 rpm only
Synthetics 800 rpm
Wool 600 rpm
Silk drain only
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Note 1: During the (Cotton) cycles 1 and 2, it is not possible to eliminate the spin cycle or reduce the pre determined spin speed."
Note 2: For the first two Programmes (Cottons Regular and Cottons Colored) the garments will be spun at maximum speed.
This allows to get the most from the spinning phase and reduce time and energy needed for the drying.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Delay timer
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed (this
may be between 1 hour and 24 hours).
To disable the function press the button until the text
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
!
This option is enabled with all programmes.
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this
function offers a high-performance wash.
!
This function may not be used in conjunction with wash cycles 4, 5, 6, 8, 10, 12, 13, A, B, C.
Extra rinse
By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
!
This function may not be used in conjunction with wash cycles 5, 10, B, C.
10
Tap water
15 °C/ 59 °F
20 °C/ 68 °F
40 °C/ 104 °F
57 °C / 134 °F
75 °C / 167 °F
is displayed.
.