Advanced Bionics CI-5295 Instrucciones De Uso página 18

Beginning with the earhook disconnected, align the
earhook flush with the sound processor. Hold the earhook
firmly at the top and push towards the sound processor
until it meets flush with the sound processor.
Using the provided pin removal tool, place one of the pins in
the small hole on the side of the tool. This will help to steady
the pin as you line it up with the pin hole on the earhook.
Line up the pin with the hole in the earhook and gently
push it through the hole. The pin will move from one side
of the sound processor, through the earhook to the other
side of the sound processor, holding the earhook in place.
The pin should not come out the other side.
16