Printing Measuring Results; Simultaneous Printing And Creating Of A Pdf Document; Documentation Format - SI Analytics ViscoClock plus Manual De Instrucciones

54

4.7.3 Printing measuring results

The measuring results saved in the internal memory can be printed by means of a printer connected via
the USB interface (TZ 3863 or other printer compatible with the ViscoClock plus).
A recognized printer is displayed via a respective symbol (H) in the lower status bar.
In order to print, press the <SET> key.
After successfully printing, the internal memory is deleted.
You will not be able to create a PDF document with these measuring results at a later time.
However, simultaneous saving and printing is possible (see  4.7.4).

4.7.4 Simultaneous printing and creating of a PDF document

The ViscoClock plus supports the simultaneous connection of a USB drive and a USB printer (e.g. TZ
3863). The second USB host connection can be created by a USB OTG adapter cable (Mini-B plug on
USB A connection).
If both devices were successfully detected and the printing process was started via the <SET> key,
the measuring results will be saved as a PDF document and printed at the same time.

4.7.5 Documentation format

The documentation of the measuring results (PDF/printout) has the following format:
No.
1
No.
Date
Time
SID
VID
Flow Time
The CSV documentation differs only by the omitted measurement number
Format:
Example:
When opening the CSV file in Microsoft Excel: Excel expects different decimal separators in the
standard setting, depending on the system language. Therefore, the ViscoClock plus converts the decimal
separator depending on the selected time/date format.
Type Time/date format
Anglo
Europ.
If display problems should occur, you can set up your own decimal separator in Excel (2010):
1. File>Options->Advanced.
2. Deactivate the setting "Take separators from operating system".
3. Define the period or the comma as a decimal point (separator) as per the output of the
ViscoClock plus.
Date Time
22.08.16 13:43
Consecutive measurement number in the internal memory
Date, display format depends on set format (12/24H)
Time, display format depends on set format (12/24H)
Sample ID = sample number
Visko ID = viscometer number
Measuring time (flow time)
Date;Time;SID;VID;Flow time
22.08.16;13:43;1;9;176.54
Decimal separator
12H
24H
SID VID Flow Time
01 09 176.54
Period (.)
Comma (,)