Storage And Transport; Recycling And Disposal; Accessories And Spare Parts - SI Analytics ViscoClock plus Manual De Instrucciones

62
7 Guarantee
We provide guarantee for the device described for two years from the date of purchase. This guarantee
covers manufacturing faults being discovered within the mentioned period of two years. Claim under
guarantee covers only the restoration of functionality, not any further claim for damages or financial loss.
Improper handling/use or illegitimate opening of the device results in loss of the guarantee rights.
The guarantee does not cover wear parts, as lobes, cylinders, valves and pipes including the thread
connections and the titration tips. The breach of glass parts is also excluded. To ascertain the guarantee
liability, please return the instrument and proof of purchase together with the date of purchase freight paid
or prepaid.

8 Storage and transport

If the ViscoClock plus is intended to be stored intermediately or transported again, the original packaging
will provide the best conditions to protect the devices. However, in many cases, this packaging is no
longer available, so that a similar packaging must be created. Sealing of the unit in foil is advantageous
here. The devices should be stored in a room with a temperature between + 10 and + 40°C and the
(relative) humidity should not exceed 70% (rel.).

9 Recycling and disposal

Please observe the applicable local or national regulations concerning the disposal of "waste
electrical and electronic equipment".
The ViscoClock plus and his packaging are manufactured as far as possible from materials which can be
disposed of environmental-friendly and recycled in a technically appropriate manner. If you have any
question regarding disposal, please contact the service (see backside of this manual).
The main printed board carries a lithium battery. Batteries should not to be disposed of with the normal
domestic waste. They will be taken back and recycled or disposed of properly by the manufacturer at no
cost.

10 Accessories and Spare Parts

10.1 Accessories
VZ 6550 Manual pump set "push"
VZ 6554 Manual pump set "suction"
TZ 1858 All voltage plug power supply 100 - 240 V ~
9 V / DC, 550 mA
TZ 1852 Primary adapter for TZ 1858, for UK
TZ 1854 Primary adapter for TZ 1858, for Australia
TZ 3863 Thermal printer
TZ 3864 Printer paper for TZ 3863, very high durability (5 rolls)
VZ 6570 USB OTG adapter cable (mini B plug on USB A socket)
CT 72/... Transparent thermostats of the CT 72 series (CT 72/P, CT 72/2, CT72/4)
10.2 Spare parts
VZ 6551 Silicone plugs (8), 5 ea.
VZ 6572 Silicone cap (10) for ventilation tube, including connection hose, 1 ea.
alternatively:
VZ 5101 Silicone cap () for ventilation tube, including connection hose, 1 ea.
VZ 6556 Replacement glass tube (28) for manual pump VZ 6550 or VZ 6554