Remote Control - Global Industrial 292850 Manual Del Usuario

REMOTE CONTROL

• Point the remote control at the sensor on the appliance.
• The remote control must be no more than 23 ft. (7 meters) away
from the appliance (without obstacles between the remote
control and the receiver).
• The remote control must be handled with
or expose it to direct sunlight or sources of heat. If the remote
control does not work, check the batteries and replace with new
batteries. Do not mix new and old batteries.
Inserting or Replacing the Batteries
• Remove the cover on the rear of the remote control.
• Insert two AAA 1.5V batteries in the correct position
(see instructions inside the battery compartment).
Fig. 23
Note:
• If the remote control unit is replaced or disposed
of, the batteries must be removed and discarded in
accordance with current legislation as they are harmful
to the environment.
• Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Batteries may explode or leak if exposed to open
flames. Dispose of batteries accordingly.
• If the remote control is not being used for extended
periods of time (winter storage), remove the batteries
and store in a cool, dry location.
SWING FUNCTION
This function is useful to select the up/down swing of
air delivery.
To set this function correctly:
• Select the operating mode (Cool, Dry, Fan).
• Press the button and the deflector will stop at
different positions or it will swing continuously.
SLEEP FUNCTION
This function is useful at night as it gradually reduces
operation of the appliance.
To set this function correctly:
• Select the cool or heat mode as described above.
• Press the button.
Portable Air Conditioner
On/Off Button
Increase Button
Decrease Button
Unit Switch Button
care. Do not drop it
8
Timer Button
Fig. 22
When you choose the sleep function, the screen's brightness
will be reduced and the fan speed will run on low.
The SLEEP function maintains the room at optimum
temperature without excessive fluctuations in either
temperature or humidity with silent operation. Fan speed
is always at Low, while room temperature and humidity
vary gradually to ensure the room remains comfortable.
When in COOL mode, the selected temperature will
increase by 1°F (1°C) per hour in a 2 hour period. This
new temperature will be maintained for the next 6 hours.
Then the appliance will turn off.
When in HEAT mode, the selected temperature will
decrease by 1°F (1°C) per hour in a 3 hour period. This
new temperature will be maintained for the next 5 hours.
Then the appliance will turn off. (Model: 292852)
The SLEEP function can be canceled at any time during
operation by pressing the Sleep, Mode or Fan speed button.
In FAN or DRY mode, the SLEEP function cannot be set.
Switch From Celsius to Fahrenheit
When the appliance is in standby, press the button and you
can change the unit of temperature. For example: Before
changing, in Cool mode, the screen will display like the
figure on the left. After changing, in Cool mode, the screen
will display like the figure on the right.
For mode functionality details see pages 5-7
User's Manual
Fan Speed Button
Mode Button
Swing Button
Sleep Button
MAX 23'(7 meters)