Remote Control; Care And Cleaning - Global Industrial 292853 Manual Del Usuario

REMOTE CONTROL

1
3
4
5
6
3
Inserting or Replacing the Batteries
• Remove the cover on the rear of the remote control
• Insert two AAA 1.5V batteries in the correct position
(see instructions inside the battery compartment).
Note:
• If the remote control unit is replaced or disposed
of, the batteries must be removed and discarded in
accordance with current legislation as they are harmful
to the environment.
• Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Batteries may explode or leak if exposed to open
flames. Dispose of batteries accordingly.
• If the remote control is not being used for extended
periods of time (winter storage), remove the batteries
and store in a cool, dry location.
For mode functionality details see page 4
Electronic Window
Air Conditioner

CARE AND CLEANING

Clean your air conditioner to keep it looking new and to
minimize dust build up
Air Filter Cleaning
The air filter should be checked once a month to see if it
requires maintenance. Trapped particles and dust can build
up in the filter and may decrease airflow as well as cause
the cooling coils to accumulate frost. To clean the air filter.
2
1. Remove the filter by pulling down on the in dents of the
filter door on the front of the unit. (Fig 8)
2. Wash the filter using liquid dish soap and warm water.
Rinse the filter thoroughly. Gently shake the filter to
7
remove excess water.
3. Let the filter dry completely before placing it into the air
conditioner.
8
4. If you do not wish to wash the filter, you may vacuum the
9
filter to remove the dust and other particles.
10
Wear and Tear
To minimize wear and tear on the air condi tioner, wait at
least 3 minutes before changing modes. This will help
prevent the compressor from overheating and the circuit
breaker from tripping.
Cabinet Cleaning
To clean the air conditioner cabinet:
• Unplug the air conditioner to prevent shock or a fire hazard.
The cabinet and front panel may be dusted with an oil free
cloth or washed with a cloth dampened in a solution of
warm water and mild liquid soap. Rinse thoroughly with a
damp cloth and wipe dry.
• Never use harsh cleaners, wax or polish on the cabinet front.
• Be sure to wring excess water from the cloth before
wiping around the controls. Excess water in or around the
controls may cause damage to the air conditioner.
Note:
To store the air conditioner when not in use for an extended
period of time, remove it care fully from the window
according to the installation instructions and cover it with
plastic or place it in the original box.
5
User's Manual
Fig. 6