Bartscher 10250M Manual De Instrucciones página 28


To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid effects of this risk, follow the safety instructions presented
below:

Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.

The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.

Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range and do not immerse it into water.

Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.

The supply cable must be disconnected from the socket
only by pulling the plug.

Never carry or lift the device by the supply cable.

In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.

Never immerse the appliance, the power cord and the power
plug in water or other liquids.
- 24 -