2. Usage safety
ATTENTION!
The terms "device" or "product" are used in the warnings and instructions to refer to:
Wood chipper
2.1. Safety in the workplace
a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust. The device generates sparks
which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device
off and report it to a supervisor without delay.
d) Only the manufacturer's service centre may make repairs to the product. Do
not attempt to make repairs yourself!
e) In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
f)
Children or unauthorised persons are forbidden to enter a work station. (A
distraction may result in loss of control over the device).
g) Use the device in a well-ventilated space.
h) The device produces dust and debris during operation. It is important to
protect bystanders from their harmful effects.
i)
Use the EMERGENCY STOP if there is a risk of injury or death, accident or
damage.
j)
Regularly inspect the condition of the safety labels. If the labels are illegible,
they must be replaced.
k) Please keep this manual available for future reference. If this device is passed
on to a third party, the manual must be passed on with it.
l)
Keep packaging elements and small assembly parts in a place not available to
children.
m) Keep the device away from children and animals.
n) If this device is used together with another equipment, the remaining
instructions for use shall also be followed.
o) Make sure that the workspace is open.
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury or even death.