Publicidad
Idiomas disponibles
Idiomas disponibles
a qualified person before using it again. Non-observance could cause a fatal
electric shock!
• Do not use the appliance with wet hands, on a damp floor or when the
appliance itself is wet.
INSTALLATION
Insert the Kettle Lead Connector. Diagram A.
Turn ON the Power Switch.
The main POWER switch, located on back of the unit, must be switched ON in order for the Remote Control
or the Manual Control Panel to function. If the power switch was turned off, then all function and settings
would be Cancelled and Initialized.
IMPORTANT:
WHEN THE FIRE IS NOT IN USE OR IS TO BE CLEANED OR MAINTAINED IT MUST BE TURNED OFF AT THE MAIN
POWER SWITCH AND THE PLUG SHOULD BE REMOVED.
DO NOT COVER
Note:
When the heater is turned on for the first time, it may release a slight, harmless odor. This odor is a normal
occurrence caused by the initial heating of the internal heating elements and should not occur again
EN
Diagram A.
12
Publicidad
