EN
WARNING: If the Safety Strap interferes with your bike or other bike attachments,
or if it does not tighten securely, do not use the Trailer. Contact your a local bicycle
shop for proper installation.
NOTE: To remove the Trailer from the bike, reverse these installations steps.
Ensure wheel is properly aligned and chain properly tightened as described in
bicycle owner's manual. Install and tighten Axle Nut as described in bicycle owner's
manual.
Fixed the front wheel as trailer
Installing Flag
The Flag slides into the Slot in the side of the left Frame.
Steps:
1. Connect both sections of the Flag as shown.
2. Locate the Slot on the rear corner of the frame and slide flag shaft all the way in
so that it is secure.
9