Publicidad
Idiomas disponibles
Idiomas disponibles
Leveling the Appliance
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level.
Diagonal Check
• When pushing down the edges of the appliance
top plate diagonally, the appliance should
not move up and down at all (Check both
directions). If the appliance rocks when pushing
the machine top plate diagonally, adjust the feet
again.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and unbalance.
• If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
• If the washing machine is installed on a uneven,
weak or tilted floor causing excessive vibration,
spin failure or
error can occur. It must be
placed on a firm and level floor to prevent spin
failure.
Assembling the Anti-Rat Cover
You can insert the anti-rat cover according to the
type to protect the appliance from the rat.
1
Lay the appliance backwards.
CAUTION
• Be careful your feet or hands when you lay or
raise the appliance.
2
Insert the anti-rat cover to the assembling
bracket
from the back of the appliance.
a
3
Insert the 2 screws
assemble the anti-rat cover to the appliance.
into the holes to
b
EN
17
Publicidad
