Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Number of DMX channels:
Sound-control:
Maximum ambient temperature T
Max. housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Number of 1W LEDs:
Beam angle:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 21.01.2009 ©
230 V AC, 50 Hz ~
35 W
12
via built-in microphone
:
45° C
a
60° C
(steady state):
B
0.1 m
0.5 m
F 1 A, 250 V
27
30°
1070 x 65 x 90 mm
2.5 kg
19/35
00042163.DOC, Version 1.0