1. Open the air exhaust cover.
2. Remove the filter, clean it or replace it with a new one.
3. Close the air exhaust cover.
Cleaning filters.
Rinse the filter with warm water and let dry completely.
In the event of any fault:
•
Turn off the appliance:
•
Unplug the appliance from power
•
By following the instructions given in the table below, you can
correct some minor issues. Please check all points in the table
before you refer the repair to customer service.
Problem
Reason
1. The appliance
No power
does not work
2. Reduced suction
Dust bag full
power of the vacu-
indicator
um cleaner
Vacuum cleaner
hose clogged
If the problem is not solved, unplug the appliance from power and
report the fault to the nearest service centre. Note! All repairs must
be performed by qualified service technicians.
Remedy
Check the circuit
breaker, reset if
tripped, replace a
blown fuse
You need to re-
place the dust bag
Remove dust, hair,
and other obstruc-
tions that may
reduce airflow.
9
EN
EN