Descargar Imprimir esta página

camry Premium CR 7430 Manual De Uso página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
15. The device should be turned off every time you put it down.
16. Do not use the device near water, for example: in the shower, in the bathtub or above the
basin with water.
17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase
in temperature and damage to the device. Always, first insert the plug into the power socket in
the device and then the power supply to the mains socket.
18. Do not use the bed sheet in folded condition. Do not put pins, needles and other metal
objects in the sheet.
19. Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated
area until it is completely dry.
20. Do not put the power cord on a warmed sheet. Do not fold the equipment when it is
placed on top during storage. Check the equipment periodically for signs of wear or damage.
If such signs or equipment are used improperly, please contact your supplier before
continuing to use it.
21. Store in a dry place. Never put heavy objects on the sheet.
22. Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
23. Never cover the controller.
24. Before switching on the electric sheet, make sure that it is evenly distributed, there are no
kinks or folds.
25.
Product can be washed in the washing machine in 30°C temperature
power cord and controller before washing. Switch or controller - the regulator must not be wet
during washing, and during drying the cord must be in a horizontal position to ensure that the
water does not flow into the switch or controller - the regulator.
26. Do not iron the electric sheet!
27. This equipment is not intended for medical use in hospitals.
28. The device should cool down before storage.
29. The device may be used only with the types of removable elements specified in the
equipment marking.
30. Do not use the device on adjustable beds or if the device is used on an adjustable bed,
check that the blanket and cord cannot get stuck or corrugated, eg on hinges.
31. The device is equipped with a fuse protecting against overheating, which should not work
when used in accordance with the intended use of the equipment. If the fuse trips, the device
will stop working, the equipment must be returned to the manufacturer or its representative
for repair.
Product: Electric throw blanket CR7430
This electric blanket is intended to be used as an over blanket, it is to be on top of the individual and not under them, or it should be placed
above a top sheet on top of the person and not under them on a mattress. Do not tuck it in around or under the person. It should remain
loose so as not to prohibit the user's movement. Do not cover the controller and do not exert pressure on the controller.
BEFORE FIRST USE
1.The product needs to be unfolded before switching on.
2. Please set at "H" high temperature position preheating 30-60 minutes before using. When using it, select the appropriate temperature
position according to human body's feeling.
DESCRIPTION OF THE DEVICE - electronic controller
1. Temperature controller
3. Blanket
5. HIGH temperature button
7. Heating setting indicator
9. Temperature setting button
OPERATING INSTRUCTIONS – electronic controller
1. The starting up state is the standby state. The digital display of temperature position is "0" and the digital display of timing position is "0".
2. Press "Temp" button (9), the digital display of temperature position is "7" and the digital display of timing position is "9".
3. Press "Temp" button (9), the heating setting indicator (7) circulates from "L.1.2.3.4.5.6.7". L being low, and 7 being high.
2. Power cord
4. Socket to disconnect the power cord before washing
6. Switch "ON/OFF"
8. Time setting indicator
10. Time setting button
7
. Disconnect the

Publicidad

loading