Bosch 3 601 M30 402 Manual Original página 36

36 | English
saw blade installation or use of accessories not recom-
mended may cause serious injury.
Additional safety warnings
When mounting the saw blade, wear protective
u
gloves. This poses a risk of injury.
Do not use HSS saw blades. Such saw blades can easily
u
break.
Never use the tool without the table insert. Replace
u
table insert if defective. Without flawless table inserts,
injuries are possible from the saw blade.
Keep your work area clean. Material mixtures are partic-
u
ularly hazardous. Light metal dust may catch fire or ex-
plode.
Choose the saw blade suited to the material you want
u
to work on.
Only use saw blades that match the specifications
u
given in this operating manual and that are tested and
marked in accordance with EN 847-1
Only use saw blades that are recommended by the
u
power tool manufacturer and are suitable for using on
the material you want to saw.
Only advance the workpiece towards the saw blade
u
when it is running. Otherwise there is a risk of kickback
occurring if the saw blade catches in the workpiece.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
1 609 92A 4PX | (20.03.2019)
Symbols and their meaning
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles.
3 601 M30 402
3 601 M30 432
3 601 M30 462
3 601 M30 472
ø 30 mm
ø 254
mm
3 601 M30 442
3 601 M30 4B2
ø 25.4 mm
ø 254
mm
Take note of the dimensions of the saw blade. The hole dia-
meter must fit the tool spindle without play. If it is neces-
sary to use reducers, ensure that the dimensions of the re-
ducer are suitable for the base blade thickness and the saw
blade hole diameter, as well as the tool spindle diameter.
Wherever possible, use the reducers provided with the saw
blade.
The saw blade diameter must match the information spe-
cified on the symbol.
a
d
c b
a The saw blade must be no more than 254 mm in dia-
meter.
b The riving knife is 2.3 mm thick.
c The cutting direction of the teeth (direction of the arrow
on the saw blade) must match the direction of the arrow on
the riving knife.
d When changing the saw blade, make sure that the cutting
width is no smaller than 2.4 mm and the base blade thick-
ness is no larger than 2.2 mm. Otherwise, there is a risk
that the riving knife will hook into the workpiece.
Bosch Power Tools