Do not use the machine within range of persons unless they wear protective clothing.
Risk of explosion! Do not spray flammable liquids.
Water that has flown through backflow preventers is considered to the non-potable.
If an extension cord is used, the plug and socket must be of watertight construction.
Inadequate extension cords can be dangerous.
Machine not suitable for connection to the potable water mains.
Connect to the water supply. The machines are not suitable for connection to portable
water mains. Connect the machine to the water supply. (It can be a water container).
Make sure the inlet water pressure keeps between 0.01MPa and 0.3MPa.The inlet pipe should at
least 5 M long. Do not use the pipe if the pipe is damaged. If you want connect this machine to
portable water mains, you must install a backflow preventer in the water pipe to prevent dirty water
flow back to the drinking water system. The backflow preventer shall comply with EN 60335-2-79
ANNEX AA.
The electric supply connection shall be made by a qualified electrician and comply with IEC 60364-1.
Electric supply should include a residual current device for max. 30 mA.
The appliance is intended to be used at a temperature above 0 degree.
Read all the instructions before using the product.
Before each use pressure must be released! Trigger on wand then start the washer.
To reduce the risk of injury, close supervision is necessary when a product is used near
children. High-pressure cleaner shall not be used by children or untrained person.
Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with
the controls.