Publicidad
Idiomas disponibles
Idiomas disponibles
When the machine is running, please maintain a constant water supply. Without water
circulation will damage the sealing rings of the machine.
It is necessary to turn on the spray lance within one or two minutes after the machine has
been started. Otherwise, the temperature of the circulating water within the machine will soon rise to
a critical point, which will cause damage to the sealing rings inside the machine.
Don't start and run the machine in a place excessively cold so as to prevent the machine
from the freezing current.
This appliance has been designed for only using cleaning water, do not use corrosive
chemicals.
Use cleaning agent supplied or recommend by the manufacturer.
Do not use the appliance within the range of persons unless they wear protective
clothing.
High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at
persons, live electrical equipment or the appliance itself. Pressure washers should not be pointed at
tire walls, as it may be possible to damage them.
Do not direct the jet against yourself or others in order to clean clothes or footwear.
Disconnect from the electrical power supply before carrying out user maintenance.
To ensure the appliance safety, please only use original spare parts from the
manufacturer or approved by the manufacturer. Do not use the machine before you changed them if
they are damaged.
High pressure hoses, fittings and couplings are important for the safety of the appliance.
Use only hoses, fittings and couplings recommended by the manufacturer.
Do not use the appliance if a supply cord or important parts are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
Incorrect fuels shall not be used, as they may prove hazardous.
Be aware of the recoil caused by the water jet when the machine is switched on.
Publicidad
