USE AND INSTALLATION INSTRUCTIONS
IT IS IMPORTANT TO FOLLOW THESE INSTRUCTIONS FOR PERSONAL SAFETY
INCORRECT INSTALLATION CAN CAUSE SEVERE INJURIES.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with appliance.
- DO NOT allow children to play with fixed controls. Keep remote controls away from
children.
- Before each maintenance intervention, installation or window cleaning switch off the
motor power supply.
- Before installing the drive motor, remove any unnecessary cable and disconnect any
equipment not required for the working of the motor itself.
- Frequently examine the installation for imbalance and signs of wear or damage to
cables and springs. DO NOT use if repair or adjustment is necessary.
- The switch, kept manually under tension, must be fixed near the equipment, but far
from the mobile parts and at a height of at least 1.5 m.
- During connection follow the instructions thoroughly. If you have any doubt, NEVER
act at random but consult competent technicians.
- Keep persons away from moving awnings and rolling shutters.
- Shutters: take care when operating the manual release with shutter open since it may
fall rapidly due to weak or broken springs.
- Connection devices, supports and adaptors are not supplied with our motors but
separately. For use and choice consult the "Tubular motors" catalogue.
- Fixed controls have to be installed visibly.
WARNING
KEEP THESE INSTRUCTIONS.
20