Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
try to repair them! ALWAYS USE MANUFACTURER'S GENUINE SPARE
BLADES
!
ATTENTION!
!
cated sequence, making sure that the blades' wings are facing towards
the interior of the deck cutting deck and that the concave part of the flexi-
ble washer (1) is pressing against the blade. Fully tighten the fixing
screws (2).
Vertical positioning
ATTENTION!
!
one person and should only be done on a hard level surface.
If you need to get to underneath the lawn-
tractor, it is possible to lift it up into a verti-
cal position after having removed the
grass-catcher or stone-guard, and having
made sure that there is less than 2 litres
of fuel in the tank.
Make sure that the machine rests on the
indicated points, inserting a wedge (1) of
about 120 mm beneath the lower edge of
the plate and taking care to not damage
plastic parts and the supports for the
grass-catcher.
DANGER!
!
stability of the lawn-tractor before
carrying out any type of work on the
machine and avoid operations which
may cause it to fall over.
All manuals and user guides at all-guides.com
When reassembling the blades, always follow the indi-
Vertical positioning is best accomplished by more then
Be sure of the good
1
120 mm
1
eng 33
1
Publicidad
