Publicidad
Idiomas disponibles
Idiomas disponibles
English (original instructions)
ENGLISH
PADDLE SWITCH GRINDER
DCG409
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Max. Power Output
Rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-3:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a
=
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a
=
h,DS
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in D
WALT EN60745 and may be used to compare one
E
tool with another. It may be used for a preliminary assessment
of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
40
EC-Declaration of Conformity
o
Machinery Directive
WALT one of the
E
Cordless Small Angle Grinder
DCG409
DCG409
V
18
DC
WALT declares that these products described under Technical
D
E
1
Data are in compliance with:
Li-Ion
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
W
1647
+A2:2013 +A11:2014 +A12:2014
min
-1
9000
These products also comply with Directive 2014/30/EU and
mm
125
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm
6
The undersigned is responsible for compilation of the technical
M14
file and makes this declaration on behalf of D
mm
21.5
kg
1.81
Markus Rompel
dB(A)
83
Vice-President Engineering, PTE-Europe
dB(A)
94
D
WALT, Richard-Klinger-Straße 11,
E
65510, Idstein, Germany
dB(A)
3
20.11.2020
a
WARNING: To reduce the risk of injury, read the
m/s
2
8.3
instruction manual.
m/s
2
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
m/s
2
2.6
signal word. Please read the manual and pay attention to
m/s
2
1.5
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
+A13:2015.
WALT at
E
WALT.
E
Publicidad
