Publicidad
Step 8
Fasten three ANGLE BRACKETS (5G) to the TOP (C). Use
å
three BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the TOP MOLDING (L) to the TOP (C). Use three
å
BLACK 9/16" LARGE HEAD SCREWS (1S) through the
BRACKETS on the TOP and into the TOP MOLDING.
NOTE: There are no pre-drilled holes in the TOP
å
MOLDING. The SCREWS will tighten into the groove.
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
Page 12
5G
1S
408739
Side Step: Make
nachos. (Optional, but
recommended.)
The groove must be
closer to the TOP (C).
L
C
www.sauder.com/services
Publicidad
