Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
After fastening the miter saw securely to the tool mount, dismounting or
sliding the miter saw on the universal Workstation can easily be done by
adjusting the tool mount handles.
TOOL MOUNT
BAG
4
6
Attach tool mount
Place tool mount on main beam, making sure
handle is in the unlock position.
7
Rotate handle clockwise,
WARNING
!
from the unlock position, to
keep tool mount firmly fixed to beam.
Tool mount can then be moved along or
tightened to beam.
Repeat this process with second tool mount.
6
8
Mount miter saw
Slide 2'' square bolts in T-slot. Align bolts with
saw holes and lower saw onto support beams.
Use alternate length 5/16'' hex bolts if the 2''
supplied bolts are too long/short.
Publicidad
Tabla de contenido
