Setting The On Timer - Danby DAC6304DE Manual De Instrucciones

Setting the On Timer

Remote Control
Control Panel
12
E-
The On Timer enables you to switch on the air conditioner automatically after a
given time. You can select the On timer only when the air conditioner is off. You
can select the On timer when the air conditioner operates in the Cool or Dry mode.
1
Check that the air conditioner has been switched off; if necessary,
press the (On/Off) button.
2
Set the operating time by pressing the
or button on the unit one or more times until the desired time is dis-
Timer
played. The operating time can be set between 1 and 24 hours.
Result: Each time you press the
- The time is adjusted by 1 hour and displayed on the control
panel
- The unit beeps
The operating time is displayed and decreases automatically to
indicate the remaining time.
The air conditioner starts up in the Cool or Dry mode automati-
cally when the operating time reaches zero.
You can select the fan speed, temperature and Energy saving mode
after setting the On timer and Off timer mode. However, when you
change the mode, the On timer and Off timer mode is canceled.
To Cancel the On Timer
To cancel the timer, press:
Timer on the remote control or unit one or more times until "--" is displayed.
or
The (On/Off) button on the remote control or unit (The air conditioner
operates in the mode selected when the unit was last used.)
button on the remote control
button:
Timer