Publicidad
Idiomas disponibles
Idiomas disponibles
LOW PROFILE MOUNT INSTALLATION
Turn Off Power at Breaker
To avoid possible electrical shock, before installing your fan, disconnect the power
by turning off the circuit breakers to the outlet box associated with the wall switch
location.
1. Installing the Ceiling Bracket
20
WARNING
If the ceiling is cement or concrete, place the mounting
bracket to the ceiling, draw holes on it through the bracket
holes, then use the impact drill with 8mm drill bit to drill holes.
Use concrete anchor to lock mounting bracket to the ceiling.
See figure 4.
If ceiling is wood, then use woods crews to lock the
mounting bracket.
See figure 5.
Take off the mounting plate from the hugger
canopy. See figures 2 and 3.
Publicidad
