Publicidad
Idiomas disponibles
Idiomas disponibles
2. Blade Installation and Low profile Canopy
For No light version. See page 23
For Integrated LED Light: Loosen the screws and take off the motor housing from the motor. Moving
clockwise, slide each blade edge under the lower cover, align the mounting holes with the holes on the
motor unit, and secure with the airfoil hardware. (See figures 4,5,6,7)
Place the motor housing back to the motor, lock with the screws which have been took before.
(see figures 8,9)
LOW PROFILE MOUNT INSTALLATION
21
Publicidad
