TROUBLESHOOTING
Troubleshooting
Fan Doesn't Work
• Make sure power switch is on.
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy and check all the connections
according to the wiring diagram.
Excessive Wobbling
• Make sure the blades are properly installed on the blade iron posts.
• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so, replace all of the blades.
Fan turns but does not create much air.
• The fan may be running in reverse, so air is directed upwards.
• The room may contain items that block the airflow.
• The fan may be too small for size of the room.
Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
29