LED CORDLESS WORK LIGHT
LITHIUM ION 360
OWNER'S MANUAL
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the work light safely and effectively.
Please read and follow these instructions and precautions carefully.
1.
IMPORTANT SAFETY INSTRUCTIONS.
1.1 SAVE THESE INSTRUCTIONS – This manual contains important safety and
operating instructions.
1.2 Read, understand and follow all instructions, cautions and warnings listed in this
manual. Failure to follow all instructions and abide by all cautions and warnings
could result in personal injury, injury to others and property damage.
1.3 IMPORTANT! CHARGE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS.
1.4 DO NOT turn on the work light while it is being charged.
1.5 DO NOT handle or move the work light while it is being charged.
1.6 DO NOT look directly into the light or shine the light directly into the eyes of any
person or animal.
1.7 DO NOT allow children to use the work light.
1.8 DO NOT operate the work light if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified service person.
1.9 DO NOT leave the battery in a discharged state.
1.10 WARNING! Do not use any other chargers except the ones provided to charge the
internal battery. Use of a charger not supplied by Schumacher® Electric Corporation
may result in a risk of fire, injury to persons and/or damage to property.
1.11 DO NOT use the work light with a charger which has a damaged cord or plug,
replace the cord or plug immediately.
1.12 IMPORTANT! Make sure the voltage marked on the charger plug is the same
as the work light.
L I T H I U M - I O N
• 14 •
T E C H N O L O G Y
EN