Schumacher Electric SL28B Manual De Instrucciones página 18

6. OPERATING INSTRUCTIONS.
6.1 Hang the work light, using the hooks on the back. When hung from a single hook,
the work light can be rotated 360° for more precise positioning.
6.2 The magnets may be used instead. Attach to any ferrous metal surface.
6.3 Direct the lens away from your eyes before turning on the work light.
6.4 Press once to turn on the 3W end LED.
Press a second time to turn on the high-power SMD LEDs.
Press a third time to turn on the low-power SMD LEDs.
Press to turn off.
6.5 Recharge the work light after use, and at least every 6 months.
7. MAINTENANCE INSTRUCTIONS.
7.1 After use and before performing maintenance, unplug and disconnect the work
light.
7.2 Use a dry cloth to wipe any dirt or oil from the chargers, cords and case.
7.3 Ensure that all of the work light's components are in place and in good working
condition.
7.4 Servicing does not require opening the unit, as there are no user-serviceable
parts.
7.5 Any servicing should be performed by qualified service personnel.
8. STORAGE INSTRUCTIONS.
8.1 Store inside, in a cool, dry place.
8.2 Take care to avoid/prevent damage to the chargers, cords and unit. Failure to do
so could result in personal injury or property damage.
8.3 Charge the work light's internal battery immediately after purchase, after every
use and every 6 months.
8.4 All batteries are affected by temperature. The ideal storage temperature is
at 21 C°. The internal battery will gradually self-discharge (lose power) over time,
especially in warm environments. Leaving the battery in a discharged state may
result in permanent battery damage. To ensure satisfactory performance and
avoid permanent damage, charge the internal battery every 6 months.
L I T H I U M - I O N
• 17 •
T E C H N O L O G Y
EN