STOCKHOLM
PC611H/PC612H
EN
Problem
The pilot light does not light up
The night light goes out
Burner does not light
- All repairs must be carried out by a qualified person.
40
Probable cause
The gas valve is closed
The gas cylinder is empty
The gas supply is blocked
Air in the pipe
The connections are not tight
enough
Residue interferes with the
proper operation of the pilot
light
The connections are not tight
enough
Thermocouple is not working
properly
There is a gas leak
Lack of pressure
Insufficient pressure
Blocked burner
The button is not ON
Thermocouple is not working
properly
The pilot light is in the
horizontal position.
Solution
Open the gas valve
Replace it
Clean or replace the gas supply
Carry out a purge
Check and tighten the
connections
Clean the area with a dry
dry cloth
Check and tighten the
connections
Replace the thermocouple
Check and tighten the
connections
Check the gas cylinder
Check the gas cylinder
Dismantle and clean the part
Turn the knob to ON
Replace the thermocouple
Replace the pilot nozzle
correctly and relight.
happy-garden.fr