Thermador M271 Manual De Uso Y Cuidado página 11

613/8"
(1559mm
F
407/16"
293/4"
(755mm)
293/4"
(755mm)
24"
2713/16"
(706mm)
603/4"
(1543mm
595/8"
(1514mm)
93/4"
(248mm)
_ 237/8" (606mm)
24"
(610mm)_
2713/16" 40"
=m) (1018mm)
381/8"
(968mm)
93/4"
(248mm)
.._ 237/8" (606mm)
28112"
iiiiiiiiiiiiiiiiiiiiii
28112"
Combo Oven with Microwave and
Warming Drawer 30"
It is good practice, when oven is in-
stalled at the end of a cabinet run, ad-
jacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's extend-
ing front to back flush with the bottom
and the side of the opening. The sup-
porting base must be well secured to
the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be flat and
capable of supporting a weight of at
least 310 Ibs (141 kg).
Combo Oven with Warming
Drawer 30"
It is good practice, when oven is in-
stalled at the end of a cabinet run, ad-
jacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's extend-
ing front to back flush with the bottom
and the side of the opening. The sup-
porting base must be well secured to
the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be flat and
capable of supporting a weight of at
least 290 Ibs (132 kg).