Service
To replace the oven door:
I
1. Holding the door firmly in both hands,
place hinges in hinge slots.
2. Open door all the way to expose hinges
and slots.
3. Push lever down and away from you
until flush with the bracket.
4. Close and open door slowly to be sure
it is correctly and securely in place.
Door must be straight, not crooked.
Before Calling Service
Data Plate
See Use and Care Manual for troubleshooting
information. Refer to the Warranty
in the Use an Care Manual.
To reach a service representative,
see the contact information at the front of the
manual. Please be prepared with the information printed on your product data plate
when calling.
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service. The data plate is located on the underside of
the control panel:
Data Plate