Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
Read instruction manual
Only for EU countries Do not dispose of electric equipment or battery pack together with
household waste material! In observance of the European Directives, on Waste Electric and
Electronic Equipment and Batteries and Accumulators and Waste Batteries and Accumulators
and their implementation in accordance with national laws, electric equipment and batteries and
Ni-MH
battery pack(s) that have reached the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Li-ion
Intended use
The tool is intended for sawing wood, plastic and ferrous materials.
Noise
The typical A-weighted noise level determined according to EN62841-2-11:
Sound pressure level (LpA) : 82 dB(A)
Sound power level (LWA) : 93 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter- mined according to EN62841-2-11:
Work mode: cutting boards
Vibration emission (ah,B) : 18.7 m/s Uncertainty (K) : 1.5 m/s²
Work mode: cutting wooden beams
Vibration emission (ah,WB) 19.7 m/s²
Uncertainty (K) : 1.5 m/s²
NOTE: The declared vibration emission value has been measured in accordance with the standard test
method and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to the trigger time).
3
Keep Working