Publicidad
Idiomas disponibles
Idiomas disponibles
Switch action
1. Lock-off button
2. Switch trigger
CAUTION:
: Before installing the battery cartridge into the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
Adjusting the shoe
1. Shoe
2. Shoe adjusting lever
When the reciprocating saw blade loses its cutting efficiency in one place along its cutting edge, reposition
the shoe to utilize a sharp, unused portion of its cutting edge.
This will help to lengthen the life of the reciprocating saw blade.
The position of the shoe can be adjusted. To reposition the shoe, open the shoe adjusting lever and select the
suitable position, then close the shoe adjusting lever.
CAUTION:
After adjusting the position of the shoe, always lock the shoe adjusting lever securely.
2
Lock off position
2
To prevent the switch trigger from
1
accidentally pulled, a lock-off
button is provided. When the
switch trigger is released, the tool
will be automatically locked.
To start the tool, Press down the
lock-off button, then simply pull the
switch trigger. Tool speed is
increased by increasing pressure
on the switch trigger. Release the
switch trigger to stop.
1
Lock on position
10
Keep Working
Publicidad
