Klarstein AURELIA COLETTE Manual Del Usuario página 22

EN
22
INSTALLATION
Preparation
Position the hanging plate on the ceiling and then mark the position of the screw holes.
Fasten the hanging plate using 1 1 or 8 screws, depending on the nature of your ceiling:
Wooden ceiling
Use 1 1 ST4 screws for wooden ceilings.
Installation
1
Concrete ceiling
Use 8 expansion bolts for
concrete ceilings.
Fasten the angle bars to the
hanging plate with the 8 screws
(M5). Extend the angle bars to the
desired height and fix the bars with
16 screws (M5), washers and nuts.
Important: The angle bars must
have an overlap of at least
100 mm.