Bluetooth Hands-Free System; Enter Bluetooth Mode; Paring And Connection; Use The Mobilephone To Do Connection Or Disconnection - KDX R-091 Manual Del Usuario

5 BLUETOOTH HANDS-FREE SYSTEM

5.1. ENTER BLUETOOTH MODE

Press MODE button on the remote control repeatedly to select BT mode, it
will display BT-Dial interface as right.
NOTE: Press MENU button to display mode menu inferface then rotate the
VOL knob to select BT mode, finally press SEL button also can enter the
mode.
5.2. PAIRING AND CONNECTION
1 Turn on the Bluetooth mode of the mobile phone;
2 Select the item of Finding the Bluetooth Device and enter it. After finishing the finding, it will show the
name of the Bluetooth Device if finding a Bluetooth Device. Select it and enter it, then it will show an
interface that ask you to input a password, input the password 0000 and then enter it. Then it will tell you
pair OK.
3 For some mobile phones, they can automatically connect with the BT device of the car audio system
after pairing is ok; for some mobile phones, they need to select the paired BT device and press the
CONNECTION button . When connection is ok, the LCD of the car audio system will show LINK OK.
5.3

USE THE MOBILEPHONE TO DO CONNECTION OR DISCONNECTION

Use the mobile phone to do connection or disconnection In the connection status, find the paired and
connected Bluetooth Device, then press the disconnection button to do disconnection.
In the disconnection status, find the paired and disconnected Bluetooth Device, then press the connection
button to do connection.
5.4

CONNECTION STATUS

In the connection status: the audio of mobile phone transfers to the car audio system whenever a dialing
takes place or receiving a call.
5.5

DIALING IN CONNECTION STATUS

5.5.1

DIAL WITH THE MOBILE PHONE DIRECTLY

You can dial a telephone number directly using your mobile phone as you use to do with BT connection to
car audio player
5.5.2

DIAL WITH REMOTE CONTROL

Dial with remote control with the following procedures:
1 Input telephone number with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
2 Short press TEL to execute the dialing.
3 To redial the last phone number dialed, press REDIAL button on the remote control to dial the last
phone number.
5.6 ACCEPT/REJECT/END CALL
5.6.1 ACCEPT A CALL
During ringing, short press TEL button to accept the call
5.6.2 REJECT A CALL
During ringing, short press HANG UP button to reject the call
- 16 -
Bluetooth mode interface