Transfer Audio To Car Audio Player; Trouble Shooting - KDX R-091 Manual Del Usuario

5.6.3 END A CALL
During talking, short press HANG UP button to end the call
5.7

TRANSFER AUDIO TO CAR AUDIO PLAYER

To transfer the audio of a file played by Mobile Phone to the Car Audio
Player In the connection status between the Bluetooth devices of the Car
Audio Player and a Mobile Phone, if the mobile phone can play audio or
video files and support A2DP, when the Mobile Phone plays an audio or
video file(For some Mobile Phones, You must select Play by BT firstly),
the audio of the playing file will be transferred to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, the functions of the MUTE, EQ,
LOUD, + , - and SEL buttons are the same as one in media mode(no fast forward/backward functions for
the / buttons).
The other buttons available in media mode are not available.
6

TROUBLE SHOOTING

Please read the user's manual carefully before using the player. If you have any troubles in using this
player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble
after using all the suggestions, please contact the company or the technical service center authorized by
us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it
may cause electric shock.
NO PICTURE, SOUND AND INDICATION
* Ensure that the power switch is on.
* Ensure that the wall inlet is ok.
* Ensure that the power cord is not damaged or the fuse is not blown.
* Ensure that the power plug is connected to the inlet tightly.
NO SOUND BUT PICTURE OK
* Ensure that the player s audio output has a good connection with TV s audio input.
* Check whether the audio connector is damaged.
* Check whether you have turned down the volume.
* Ensure that you have set the right AUDIO setup of the player.
* Ensure that the audio is not under mute.
NO PICTURE BUT SOUND OK
* Ensure that the player s video output has a good connection with TV's video input.
* Ensure that you have turned your TV to the AV input channel connecting to your player.
* Check whether the video connector is damaged.
* Ensure that you have set the right VIDEO settings of the player.
BLACK AND WHITE PICTURE OR SCREEN ROLLING
* Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting.
FLAWS OF PICTURE OR SOUND
* Check whether the setting of AUDIO is right.
* Check whether the AV connector and the output terminal is stained.
* Check whether there is condensation inside the Lens. If so, leave the player off for an hour or so, then
try again.
- 17 -