To Reset The Unit; To Adjust Sound Mode; Return Control; To Do Turn On/Off Tft Display - KDX R-091 Manual Del Usuario

2.9

TO RESET THE UNIT

When the display is incorrect or the function buttons are not effective or sound is distorted, press the REL
button to detach the front panel from the unit and remove it, then use a cuspidal object to press the
RESET button, which will reset to factory default, and re-instate the correct functions

2.10 TO ADJUST SOUND MODE

To adjust the sound modes, briefly and repeatedly press the SEL button on the front panel to select one of
the sound mode such as : VOL, BAS (without preset EQ), TRE (without preset EQ), BAL, FAD.

2.11 RETURN CONTROL

Press the button on the remote control back to the previous interface.
Press the MENU button on the remote control return to the mode menu interface.

2.12 TO DO TURN ON/OFF TFT DISPLAY

Press and hold the SEL button to turn off the TFT display.
Press any button on the unit or remote control to turn on
.

GENERAL SETUP

2.13. TO DO SETUP

In setup mode, use VOL KNOB on the front panel or direction buttons
on the remote control to select the item and press SEL button on the
front panel or OK button on the remote control to confirm your
selection.
GENERAL SETUP
Logo: this function allows to choose the starting screen.

CLOCK SETUP

Beep: Choose the button's sound on/off.
CLOCK SETUP
Clock mode: Select 24 HOUR or 12 HOUR.
Clock time: Adjust the clock.

AUDIO SETUP

AUDIO SETUP
MBP: Choose between MBP LEFT/RIGHT/OFF.
Loud: Choose between Loudness ON/OFF.
EQ: Choose between the different types of EQ.
VIDEO SETUP
Brightness
VIDEO SETUP
Contrast
Saturation
Hue
Standard Video
FUNCTION
Radio region: choose the radio zone.
FUNCTION SETUP
RDS setting: ON/OFF
- 8 -