Makita 3706 Manual De Instrucciones página 7

Vacuum cover
Cleaner operations can be performed by connecting the
cutout tool to Makita vacuum cleaner or dust collector.
Installing vacuum cover
2
► 1. Thumb screw 2. Vacuum cover
Loosen the thumb screw and remove the shoe. Attach
the vacuum cover, and fasten it securely using the
thumb screw.
Installing vacuum cover with circular
guide
3
► 1. Circular guide 2. Projections 3. Vacuum cover
Release the thumb screw which serves to secure the
vacuum cover. Align the projections in the circular guide
with the grooves in the vacuum cover, and secure
the vacuum cover and circular guide using the thumb
screw.
1
1
2
To adjust the cutting depth, proceed first by loosening
the thumb screw and then by sliding the vacuum cover
and circular guide together. After completion of the
adjustment, tighten the thumb screw securely.
1
2
3
► 1. Circular guide 2. Thumb screw 3. Vacuum cover
4. Loosen 5. Tighten
Connecting to Makita vacuum
cleaner or dust collector
► 1. Vacuum cover 2. Hose 28 3. Hose for vacuum
cleaner
Connect the hose of a vacuum cleaner/dust collector
to the dust nozzle. When connecting to Makita vacuum
cleaner, an optional hose 28 mm (1-1/8") in inner diam-
eter is necessary.
When connecting to Makita dust collector, connect the
hose for the dust collector directly to the dust nozzle.
► 1. Vacuum cover 2. Hose 28 3. Dust collector
7 ENGLISH
4
5
1
2
3
1
2
3