Oster CKSTRC7029 Manual De Instrucciones página 16

O P E RATI NG I N S T R U C T I O N S
HOW TO USE THE CONTROL PANEL
1. Plug appliance into appropriate electrical outlet. All function indicator lights
will start blinking until one of the function buttons is selected.
2. Cooking Function Buttons- press to select desired cooking function:
• Rice "Arroz"
• Brown Rice "Arroz Integral"
• Steam
• Warm
• Sauté
3. Press Start/Stop button
pressed to change from one cooking function to another.
US IN G T H E M U LT I F U N C T I O N
SAUTÉ FUNCTION
This function was designed to give you control when sautéing and needs to be
controlled manually as follows:
1. Remove lid and place food inside unit.
2. Plug unit into appropriate electrical outlet. All function indicator lights will start
to blink. Press Sauté Button
3. Press Start/Stop Button
4. Unit will heat up inner pot and sauté food inside.
5. This function requires close supervision and needs to be controlled manually.
6. Skip this step if you are planning to cook rice. If you wish to sauté only, press
Start/Stop Button
time is 30 minutes; unit will then automatically switch to keep warm mode.
7. When sautéing is done, press White Rice Button "Arroz" or Brown Rice Button
"Arroz Integral" depending on type of rice you would like to cook.
8. Unit will stop sautéing.
9. Add rice and water into inner pot.
10. Press Start/Stop Button
NOTE: Do not use a metal spoon to stir food inside inner pot since that might
damage ceramic non-stick coating, which could affect performance in the long term.
to start or stop a cooking function. It must be
R I CE C O OK E R
. Only Sauté Indicator Light will remain solid on.
to start sautéing.
when you achieve desired results. The maximum sauté
to start automatic cooking process.
E n g li s h -5