Rain Bird TBOS Manual De Instrucciones página 7

english
next program, press
program.
7. When you have set the watering days for all of
your programs, press
icon, Setting the Start Times display.
Even day cycle
1. The watering days are set
for even days.
B
2. Press to move to
G
, setting the start times.
Odd day cycle with 31st
day off
1. The watering days are set
for odd days with the 31st
day off.
B
2. Press to move to
setting the start times.
Odd day cycle with 31st
day on
1. The watering days are set
for odd days with the 31st
day on.
B
2. Press to move to
setting the start times.
1 through 6 day cycles
1. Watering days for 1 through 6 day cycles are the
same for all three programs.
C
2. Press to select the day
cycle from 1 to 6 days. For
example, to select a 6-day
C
cycle, press until six
days are displayed on the
bottom of the screen.
A
to change to another
G
B
to move to the
G
,
G
,
10
TBOS ™
Field Transmitter
B
3. Press to move to setting "today" in the
watering cycle.
4. If you selected a 1 to 6 day watering cycle, the
row of days in that cycle appears in the display
with a box around day 1. The only watering day
in a 1 to 6 day cycle is day 1.
5. A number appears in the display, indicating
where "today" is in the watering cycle.
O P
6. Press or to move today's position in
the watering cycle.
7. For example, if you set "today" as day 2 in a 3-day
cycle, the next watering day in the cycle will be
the day after tomorrow, since tomorrow would
be day 3, followed by day 1, the watering day.
B
8. Press to move to
times.
Setting the start times
You can set up to eight start times for each program,
but it is not necessary for you to use all eight start
times with each program. After you enter all the start
times, the transmitter will automatically organize
the start times in chronological order, from 00:00 to
23:59 or 12:00 AM to 11:59 PM.
To set the start time:
G
1. Make certain the
B
play. If it is not, press
through the menu system and display the
icon.
A
2. Press repeatedly until the program you desire
(A, B, or C) appears in the display.
O P
3. Use and to set the first start time.
C
4. Press to move to the next start time.
11
english
G
, setting the start
icon is visible on the dis-
repeatedly to cycle
G
(continued)