Jandy Smart Sync SMARTSYNC60W Manual De Instalación Y Operación página 8

ENGLISH Jandy Smart Sync
®
3.3 P-Series
1. Turn the light ON.
2. Turn the light OFF and ON the required number of times to
display the desired color or show. See Table 3 for required
numbers.
NOTE: P-Series lights always start over at 1 when changing the color/show.
For example, to change the light from Party Mode (2) to California
Sunset Mode (6), you need to turn the light OFF and ON 6 times, as
listed in Table 3.
3.3.1 Hold and Recall Features
Save unique colors (e.g. when one color is fading into another in the
middle of a show) by using the Hold and Recall features.
• To save a unique color, turn the light OFF and ON 13 times starting
when the light is displaying the desired color effect.
• To display the saved color, turn the light OFF and ON 14 times.
Page 14
LED Adapter | Installation & Operation Manual
®
Jandy Smart Sync LED Adapter | Installation & Operation Manual
® ®
Table 3. P-Series Colors and Shows
Number
1 SAm Mode (blue/magenta/white/green show)
®
2 Party Mode (fast fading color show)
3 Romance Mode (medium fading color show)
4 Caribbean Mode (green/white/blue show)
5 American Mode (red/white/blue show)
6 California Sunset Mode (warm tone color show)
7 Royal Mode (purple/orange/green show)
8 Blue
9 Green
10 Red
11 White
12 Magenta
13 Hold Feature
14 Recall Feature
ENGLISH
Color/Show
Page 15