Bosch BBS266 Instrucciones De Servicio Originales página 15

Removing the PowerTube battery
1
(6)
(5)
(15)
❶ To remove the PowerTube battery (15), open
the battery lock (6) using the key (5). The bat-
tery will be unlocked and fall into the safety re-
straint (14).
Note: When removing the eBike battery, hold it firmly
in your hand.
❷ Hold the battery firmly and press on the safety
restraint (14) from above. The battery will be
unlocked completely and fall into your hand.
Then pull the battery out of the frame.
Note: As a result of varying designs, the battery may
need to be inserted and removed using a different
method. Read the eBike manufacturer's operating in-
structions.
Inserting the PowerTube battery
(6)
(5)
2
Bosch eBike Systems
(14)
(15)
1
4
(15)
In order for the battery to be inserted, the key (5)
must be inserted into the battery lock (6) and the bat-
tery lock must be open.
❶ To insert the PowerTube battery (15), place it so
that its contacts are in the lower holder of the
frame.
2
❷ Twist the battery upwards until it is held by the
safety restraint (14).
❸ Hold the battery lock open with the key and
press the battery upwards until you hear it click
into place.
❹ Always secure the battery by closing the battery
lock (6) – otherwise the battery lock may open
and the battery may fall out of the holder.
Always check that the battery pack is locked in
u
place. To do this, pull on the battery pack (after the
key has been removed).
Always remove the key (5) from the battery lock (6)
after locking it. This prevents both the key from falling
out and the eBike battery from being removed by
unauthorized third parties when the eBike is not in
use.
(14)
3
English – 13
0 275 U07 XPX | (16.03.2023)