Miele PTD 901 Esquema De Conexiones página 7

Location of connections on the machine
Item Name
A Connection for drain hose
TWW Water connection G ¾"
EZ Entry for mains cable (inside the machine approx. 1.7 m is required for laying and connecting the mains cable)
PPE Connection for on-site equipotential bonding system
DOS1 Connection for rinse aid hose
DOS2 Connection for detergent hose
ext. DOS Connection for external dosing devices
DT / RA Connection for suction tubes (DT: detergent / RA: rinse aid)
Accessories
Flexible supply hose; connect to point TWw Flexible drain hose; connect to point A
G 3/4"
1500 mm
Installation diagram
2
1
only for Australia and New Zealand
1 On-site water tap (provided by the customer)
2 Only for Australia and New Zealand: This appliance must be installed according to AS/NZS 3500.1 and AS/NZS 3500.2. This
dishwasher has been supplied separately with a separate backflow prevention device (dual check valve).
3 Water inlet filter (included in scope of delivery of the dishwasher)
4 Dishwasher
Subject to technical alterations
G 3/4"
1500 mm
3 4
Dirt trap; install between the water stop cock
and the supply hose
| |
12020531/01; 2023-04
G 3/4"
G 3/4"
7