Qilive Q.5226 Manual De Instrucciones página 7

2. TECHNICAL SPECIFICATIONS
Operating voltage
Power consumption
Capacity
Safety class
3. DESCRIPTION
1. Filter
2. Filter holder
3. Glass jug with cover
4. Hot plate
5. On/Off switch
4. BEFORE FIRST USE
4.1. Unpacking
1. Unpack all the parts.
2. After unpacking, ensure that no part is missing or damaged in transit. If the product is
damaged or incomplete, please contact our after-sales service.
3. Clean the appliance and its components (
4.2. Remove any residue from the appliance.
1. Place the appliance on a flat, level, heat-resistant surface.
2. To obtain a perfect flavour, operate the appliance for two or three cycles with fresh water
(without coffee) before using it for the first time (
3. After all the water has run through the appliance, turn off the power. Pour away the water,
then leave the appliance to cool for five minutes. Refill with water and repeat the process.
4. An odour may be given off during this procedure due to the combustion of residue. This is
not a malfunction of the appliance. Ensure sufficient ventilation in the room !
5. Leave the appliance to cool at room temperature. Clean the appliance (
AND MAINTENANCE).
5. USING THE APPLIANCE
Warning!
Always fill the coffee maker with water before turning it on. We recommend using softened
or filtered water to avoid any build-up of scale.
Never fill higher than the maximum level line 10 to ensure that hot water does not spill during
use. Risk of burns!
Avoid brewing coffee when the water level is below the minimum level line 4.
1. Open the water reservoir cover (9).
2. Open the cover with the spray nozzle (8).
3. Pour a suitable amount of water into the water reservoir (6), depending on the number of
cups of coffee to be made. The number of cups is shown on the water level gauge (6). Never
fill higher than the maximum level line 10 on the graduated reservoir (6).
4. Place a filter in the filter holder (2).
220 - 240 V~, 50-60 Hz
900 W
1.5 litres
Class I
with indicator light
6. Water reservoir with water level gauge
7. Mains cable with mains plug
8. Cover with spray nozzle
9. Water reservoir cover
6. CLEANING AND MAINTENANCE).
5. USING THE APPLIANCE).
7
6. CLEANING
EN