Publicidad
Idiomas disponibles
Idiomas disponibles
Always follow all safety precautions
when performing maintenance to the
®
PowerMate
.
WARNING
Electrical Shock or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do
so could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting.
BELT CHANGING AND BRUSHROLL CLEANING
TO REMOVE BELT
1. Press handle release pedal and lower the
swivel. Turn PowerMate
and remove the four (4) screws securing
base to PowerMate
POWERMATE
®
upside down
®
cover.
®
CARE
2. Turn PowerMate
the rear and side latches. (A flat blade
screwdriver may be required.)
3. Grasp cover by rear and pull up to
remove it from base.
4. Lift brushroll assembly out and remove
worn belt.
- 10 -
®
right side up. Loosen
Publicidad
