Publicidad
Idiomas disponibles
Idiomas disponibles
6. Assembly and Disassembly of Silicone
※ Silicone packings are consumables that are
recommended to be replaced once every 6 to 12
months. They are available for purchase through the
Customer Service Center.
(The juicer may leak if the product is not assembled
properly.)
Extraction Packing
01
01
Seal Packing
01
01
01
01
Hold and take out the packing as if you are pulling it
back.
02
02
After cleaning, insert one side of the packing first as if
you are hooking it.
03
03
Insert the remaining part and press down the
perimeter.
Chamber Packing
01
01
Grab one side and pull it back to detach it.
02
02
After cleaning, check the top and bottom of the
packing and insert it as if you are hooking one side.
Firmly press the remaining part of the packing
03
03
without any folded area.
02
02
02
02
Hopper Packing
Assemble the packing as shown in the figure.
Juice Cap Packing
After cleaning, insert in a way that the round side of the
packing faces outward while the grid grooves face upward.
Rotating brush packing
01
01
After cleaning the silicone brush, pull it from the inside
to the outside to assemble it as shown in the figure.
02
02
Grab the top and bottom of the outer blades of the
silicone brush to pull it tightly.
09
Publicidad
