Publicidad
Idiomas disponibles
Idiomas disponibles
Shoulder Belts
1
- Tighten harness to fit snugly on
child's shoulders. It is snug if
you cannot pinch a fold in the
strap horizontally.
2
- Harness straps must be at or
just below shoulders.
3
- To adjust shoulder harness
height, first loosen harness by
pressing on adjustment button
while pulling on the harness
straps.
4
- Then turn child restraint over
and remove one harness loop
from metal splitter plate.
5
- Pull loose ends of harness
out through slots and place in
correct slot.
28
PIPA rx instructions
1
2
3
4
5
PIPA rx instructions
29
Publicidad
