Sharp PS-919BK Manual Del Usuario página 7

6
Bluetooth Connection
1. Press the SOURCE button repeatedly until the voice prompt states
"Bluetooth".
2.
Make sure that the unit is in pairing mode (blue light fl
3.
Enable Bluetooth on the device to be paired with the unit. Select
''Sharp PS-919,, from the available devices (enter the password
''0000,, if necessary) to start pairing and connection with the unit.
4.
After successful connection the "SOURCE INDICATOR" will turn solid
blue and you will hear a voice prompt ("Connected").
5. This unit is compatible with the voice assistant on your smart device.
NOTES:
– This speaker supports automatic connection with a previously paired
device after power off and power on again.
– If you want to pair with a new Bluetooth device, you must disconnect the
paired device.
– To disconnect the Bluetooth connection, long press
can turn off the Bluetooth function in your smart device. The voice prompt
will state "disconnected" when complete.
Connect two PS-919 via Bluetooth (TWS)
TWS/True wireless Stereo - Duo Mode
• This allows for two PS-919 party speakers to be connected together
as a left and right stereo speakers for a wider stereo sound-stage. The
fi rst speaker is the primary one (left audio channel) and the second the
secondary (right audio channel).
• Press and hold the SOURCE button on the second speaker until the
speaker says "Duo Mode pairing" then release the button.
• Please wait until speakers say "Duo Mode connected". The speakers are
now connected to each other.
• Pair the primary speaker with your phone.
• For Bluetooth pairing to a Bluetooth-out enabled smart device search for
Bluetooth Pairing name "Sharp PS-919" on your device and pair.
• When you will power off one speaker in Duo Mode, both speakers will
power off .
• When you Power on the speakers, they need to be turned on individu-
ally.
• When both speakers are powered on Duo Mode will automatically
reconnect and you will hear "Duo Mode connected".
• To disconnect Duo Mode press and hold SOURCE button on the secon-
dary speaker until you hear "Duo Mode disconnected"
NOTES:
– It takes up to 1 minute to connect to Duo Mode.
– When you enjoy Duo Mode, Multi phone pairing is not supported. The
primary speaker connects only one Bluetooth device.
– In Duo Mode, you can connect to only the primary speaker with the
Bluetooth device.
– To change the Bluetooth device in Duo Mode, press and hold
primary unit for 3 seconds to disconnect current Bluetooth device and
connect to the desired Bluetooth device.
– When you connect a Bluetooth device (iOS device etc.) to this unit or
operate the device, the volume level can be synchronized between each
device.
– When in Duo Mode, the functions of
synchronized with two speakers.
– In Duo Mode, make the distance between the speakers as close as possible
each other.
– Depending on network environment, the Duo Mode may not work well.
– When the Duo Mode is entered, some mobile phones (ex. AptX HD suppor-
ted devices) play music after a brief pause.
– Some mobile phones might not play music properly when you try to
connect Duo Mode during playback.
– Reset the Duo Mode connection: Disconnect by long press the SOURCE
button on the secondary speaker until you hear '' Duo Mode disconnec-
ted'' . Connection is reset.
ashing).
button or you
on
, and buttons will be
Listening to Music from External Device
The unit can be used to listen to the music from many types of external
device.
1. Connect an auxiliary audio device to the unit through the 3.5mm
audio input port.
2.
Press the SOURCE button to repeatedly to switch to AUX mode. The
blue light fl ashes slowly in Aux mode.
3. Play and control music on the audio device, and use the
buttons on the unit to adjust the volume.
USB Playback and Charging functions
The USB port on the rear panel of the unit supports playback and charging.
1.
Insert the USB drive into the USB slot on the back of the unit.
2. The speaker will enter USB mode automatically.
3. The speaker will start to play songs from the USB immediately.
NOTES:
– The USB mode only can be entered when a USB device is connected.
– supports USB devices up to 32GB capacity
– supported audio format is MP3
4. Mobile devices can be charged via the USB port.
Adjust the Light Eff ects
1. Short press the button on the top panel of the unit to change the
fl ashing mode for the centre light. There are 4 fl ashing eff ects:
– Colors gradually fl ashing.
– Dynamic fl ashing, the lights will fl ashes with the music.
– Color rotating fl ashing.
– Monochrome rotating fl ashing.
2. Long press (2 sec): changes the side light mode
3.
Longer press (4 secs) : switch all the lights off
and